Mizar 12 RGBW underwater LED fountain light
- Made of AISI 316 L stainless steel, 3-8 mm thick
- 24 VDC – 12 W max power
- Onboard LED driver – No external LED drivers
- 0-10 VPWM control (or DMX-RDM in combination with DMX-PWM4 Converter)
- RGBW full-color (4 in 1) LED with a wide chromatic range
- Specific optics for superior color mixing
- 10 m of Cascade cable, AD8 certified for permanent immersion
- Fast IP68 underwater junction upon request
- IP68 protection rate up to 5 m depth – certified
- Demountable and accessible in every part in case of maintenance
Resulted from a specific engineering design, the next generation underwater LED fountain light Mizar 12 RGBW is cutting-edge thanks to the electronics fully integrated inside, equipped with onboard LED drivers (no other driver nor electronic interface device is needed externally).
The RGBW full-color next generation LEDs, integrated inside a single case, with high chromatic performance together with specific optics ensure a wide chromatic range and excellent colour mixing.
The underwater LED fountain light Mizar 12 RGBW is complete with 10 m of a six-conductor PBS8F 2×0,5 + 4×0,34 mm² Cascade cable suitable for permanent immersion according to the NF C 15-100 AD8 certification. Upon request, it can be supplied with different cable lengths or with an IP68 underwater junction to ease and fast the installation and possible maintenance of the light.
Provided with an AISI 304 stainless steel support allowing the orientation of the light towards the water jet.
The body, the cover, the cable gland and the screws are made of AISI 316 L stainless steel. The high-performance silicone rubber gaskets together with the engineering design make the light totally IP68, suitable for permanent immersion without using any resin, but at the same time entirely demountable and accessible in every part in case of need for maintenance.
Compatible with the DMX-RDM standard by means of the DMX-PWM4 Converter.
|Mizar 12 RGBW|
|Material||AISI 316L stainless steel|
|Power supply||24 VDC|
|Max power||12 W|
|LED||Multi-chip Power LED 12 W Full Color RGBW|
|Colour||R G B W (5000°K – 7000°K)|
|Min-Max total luminous flux||860 – 1040 lm|
|Light beam||12° – 25° – 35°|
|Control||0-10 V (PWM)|
|Onboard electronics||LED drivers|
|Cable||Cascade 2×1 + 5×0,5 mm2 – 10 m – AD8 certified for permanent immersion|
|Protection level||IP68 up to 5 m depth – certified|