Mizar 24 DMX-RGBW underwater LED fountain light
- Made of AISI 316 L stainless steel, 3-8 mm thick
- 24 VDC – 24 W max power
- Onboard DMX-RDM LED driver – No external LED drivers
- RGBW full color (4 in 1) LEDs with wide chromatic range
- Specific optics for superior color mixing
- Internal temperature sensor
- 10 m of Cascade DMX&POWER cable, AD8 certified for permanent immersion
- Fast IP68 underwater junction upon request
- IP68 protection rate up to 15 m of depth
- Demountable and accessible in every part in case of maintenance
Description
Resulted from a specific engineering design, the next generation underwater LED fountain light Mizar 24-DMX-RGBW is cutting-edge thanks to the electronics fully integrated in the inside, equipped with DMX-RDM technology with onboard microprocessor and LED driver (no other driver nor electronic interface device needed externally).
The RGBW full color next generation LEDs, integrated inside a single case, with high chromatic performance together with specific optics ensure a wide chromatic range and an excellent colour mixing.
Its compatibility with the DMX-RDM communication standard and the presence of an internal temperature sensor allow also for the internal temperature monitoring.
The underwater LED fountain light Mizar 24 DMX-RGBW is complete with 10 m of specific CASCADE DMX&POWER cable with double shield for permanent immersion in chlorinated water to supply power to the light and also ensuring an extremely clean and reliable DMX-RDM signal transmission, even in tough environmental conditions. Upon request, it can be supplied with different cable length or with an IP68 underwater junction to ease and fast the installation and possible maintenance of the light.
Provided with an AISI 304 stainless steel support allowing the orientation of the light towards the water jet.
The body, the cover, the cable gland and the screws are made of AISI 316 L stainless steel. The high-performance silicone rubber gaskets together with the engineering design make the light totally IP68, suitable for permanent immersion without using any resin, but at the same time entirely demountable and accessible in every part in case of need for maintenance.
Technical features
Mizar 24 DMX-RGBW | |
Code | LED24DMX |
Material | AISI 316L stainless steel |
Power supply | 24 VDC |
Max power | 24 W |
LEDs | 6 Multi-chip Power LEDs 4 W Full Color RGBW |
Colour | R G B W (cool white 5700°K) |
Max total luminous flux | 1284 lm |
Light beam | 25° – 35° |
Control | DMX-RDM |
Onboard electronics | DMX/RDM microprocessor – Temperature sensor – LED driver |
Cable | Cascade Professional DMX&POWER Cable – Double shield – Permanent immersion in chlorinated water up to 5 ppm – AD8 – 10 m |
Protection level | IP68 |