V-Fast 100 pneumatic valve

V-Fast 100 pneumatic valve for fountains

The V-Fast 100 three-way pneumatic valve is made of nickel-plated brass, with 1″ connections and third way rotating in possibly 4 different positions on a 360° angle.

Actuator with body and internal components made of stainless steel and brass , complete with two M5 quick connections.

Minimum air response time less than a tenth of second.

Actuator working pressure: 1 bar minimum10 bar maximum.

5/2-way monostable driving electrovalve with spring return, working pressure from 2 up to 10 bar, 1/8″ connections, anodized varnished aluminum body, NBR gaskets. 24 Vdc solenoid voltage, 3 VA minimum power. Working temperature from 10°C up to +60°C. To be placed inside the technical room.

Quick nickel-plated brass connections, of which two M5 x 6 actuator side and three 1/8″ x 6 electrovalve side.

Brass silencer, 1/8″ connection to be mounted on the two electrovalve drains.

Upon request, available a compact industrial compressor, highly efficient and little noisy, complete with tank and desiccators. Max pressure 8 bar.

 

Tips for use and applications

One of a kind pneumatic valve, especially suitable for musical or dynamic fountains, when is required a high activation and deactivation speed of the water jet.

Used for sequence effects, it creates highly impressive shows.

Particular attention was paid both to the valve design and to its use. Thanks to an adapter, the valve can be used with 2 or 3 ways.

The third way, which can rotate, allows to balance the water jet flow rate also when the valve is closed; in that way the valve functioning does not affect the other water jets when more nozzles are mounted in a row on a single manifold.

The nickel-plated body and the IP68 actuator allow to use the valve underwater.

The internal structure with total water passage allows to minimize pressure drops and, thus, to reach significant heights with bigger jets and flow rates compared to other common switching devices (see the datasheet for further information).

It can be made compatible and controllable by DMX-RDM protocol by using the DMX-PWM4 Converter (see the FOUNTAIN CONTROL SYSTEMS section).

 

Technical features

 V-Fast 100 pneumatic valveDriving electrovalveConnectionsSilencerCompressor
CodeFAST100FAST100PIFAST100RAFAST100SIUpon request
N° ways2 or 35/2
Supply voltage24 Vdc
Minimum absorbed power3 VA
min. | max working pressure1 bar | 10 bar2 bar | 10 bar
Minimum switching time< 0,1 s< 0,1 s
Connections1”1/8”1/8”
Protection rateIP68 (actuator)
MaterialNickel-plated brass and stainless steelAnodized aluminumNickel-plated brassBrass
Weight2,2 Kg

 

Downloads


Datasheet